Kubota's B and L tractors both use a cylinder-shaped kubota fuel filter, which is a  kubota fuel filter. It is a transparent container that holds fuel. Fuel flows from the fuel tank to the  kubota fuel filter. As fuel passes through the filter bowl, it circulates through the filter screen inside, which then filters out all particulate deposits and other impurities. Clean fuel flows from the  kubota fuel filter to the fuel injector. Every 150-200 hours, the cylinder filter needs to be replaced.

Step 1

Park the kubota  fuel filter tractor in an area with plenty of ventilation. Make sure that the surface is level.

Step 2

Turn the engine off and engage the transmission, so the tractor will not roll.

Step 3

Locate the kubota fuel filter bowl on the front of the Kubota tractor. The kubota  fuel filter bowl is clear, with a kubota  fuel filter mounted inside of it. If the kubota fuel filter bowl has a fuel valve on the top of the bowl assembly, turn the valve to the "Off" position.

Step 4

Wrap the kubota fuel filter strap wrench around the bowl in a counterclockwise direction. Slowly turn the kubota fuel filter bowl counterclockwise until the bowl loosens. Then, finish unscrewing the bowl with your hand.

Step 5

Place the bowl on the ground. You can now access the kubota fuel filter. Pull the kubota fuel filter straight down from the bottom of the kubota fuel filter housing. Discard the old kubota fuel filter into the drip pan.

where is the kubota fuel filter on a kubota tractor

The kubota fuel filter needs to be replaced regularly. Many friends do not know where the kubota fuel filter is located. Let me introduce it to you. It is understood that there are two main installation positions for kubota fuel filters of common models:

1. External kubota fuel filter

The external kubota fuel filter is generally installed at the oil pipe connection of the vehicle chassis. When looking for the kubota fuel filter, it is generally found on the outside first. For the fuel tank, there is a kubota fuel filter similar to a metal can. If it is external, it must be seen on the fuel supply pipe.

2. Built-in kubota fuel filter

If it is not found on the outside, it is built into the fuel tank. The built-in gasoline filter is generally installed together with the gasoline pump and installed in the fuel tank.

Is there any direction requirement when installing the kubota fuel filter?

When installing the kubota fuel filter, one thing that needs to be paid special attention to is that the installation of the kubota fuel filter has a direction requirement. Generally, there will be an installation direction on the filter. One has an arrow, and the arrow is facing the direction of the engine. The second is that there are English letters on the filter, IN means in, and OUT means out.

What will happen if the kubota fuel filter is reversed?

The filter core of the kubota fuel filter is completely closed at the end close to the fuel inlet. Under normal circumstances, the fuel cannot enter from the bottom of the filter core, but can only flow to the side of the filter material and enter from the outside. The top of the filter core is also closed, and the filtered fuel can only flow out from the central pipe.

If it is installed in reverse, the fuel entering the kubota fuel filter will flow from the center of the filter material to the outside. There is no corresponding support for the outside of the filter core, so the structure will be damaged after a period of use, resulting in damage to the kubota fuel filter. Life expectancy is severely shortened.

Generally speaking, if the kubota fuel filter is installed upside down, it will have no effect at first, and the vehicle can start normally, but after a long time of use, the kubota fuel filter will fail, which will gradually affect the power performance of the engine, so Everyone must pay attention to the correct installation direction when installing.